Just In Time (JIT) is an inventory strategy implemented to improve the return on investment of a business by reducing in-process inventory and its associated costs. The process is driven by a series of signals, or Kanban (Jp. カンバン also 看板), that tell production processes to make the next part. Kanban are usually simple visual signals, such as the presence or absence of a part on a shelf. When implemented correctly, JIT can lead to dramatic improvements in a manufacturing organization's return on investment, quality, and efficiency. New stock is ordered when stock reaches the re-order level. This saves warehouse space and costs. However, one drawback of the JIT system is that the re-order level is determined by historical demand. If demand rises above the historical average planning duration demand, the firm could deplete inventory and cause customer service issues. To meet a 95% service rate a firm must carry about 2 standard deviations of demand in safety stock. Forecasted shifts in demand should be planned for around the Kanban until trends can be established to reset the appropriate Kanban level. In recent years manufacturers have touted a trailing 13 week average is a better predictor than most forecastors could provide. A related term is Kaizen which is an approach to productivity improvement literally meaning "continuous improvement" of process. Contents • 1 History • 2 Philosophy • 3 Effects • 4 Benefits • 5 Problems o 5.1 Within a JIT System o 5.2 Within a raw material stream o 5.3 Oil • 6 Theory • 7 See also • 8 References • 9 External links History The technique was first used by the Ford Motor Company as described explicitly by Henry Ford's My Life and Work (1922): "We have found in buying materials that it is not worthwhile to buy for other than immediate needs. We buy only enough to fit into the plan of production, taking into consideration the state of transportation at the time. If transportation were perfect and an even flow of materials could be assured, it would not be necessary to carry any stock whatsoever. The carloads of raw materials would arrive on schedule and in the planned order and amounts, and go from the railway cars into production. That would save a great deal of money, for it would give a very rapid turnover and thus decrease the amount of money tied up in materials. With bad transportation one has to carry larger stocks." This statement also describes the concept of "dock to factory floor" in which incoming materials are not even stored or warehoused before going into production. This paragraph also shows the need for an effective freight management system (FMS) and Ford's Today and Tomorrow (1926) describes one. The technique was subsequently adopted and publicised by Toyota Motor Corporation of Japan as part of its Toyota Production System (TPS). Japanese corporations cannot afford large amounts of land to warehouse finished products and parts. Before the 1950s, this was thought to be a disadvantage because it reduced the economic lot size. (An economic lot size is the number of identical products that should be produced, given the cost of changing the production process over to another product.) The undesirable result was poor return on investment for a factory. The chief engineer at Toyota in the 1950s, Taiichi Ohno examined accounting assumptions and realized that another method was possible. The factory could be made more flexible, reducing the overhead costs of retooling and reducing the economic lot size to the available warehouse space. Over a period of several years, Toyota engineers redesigned car models for commonality of tooling for such production processes as paint-spraying and welding. Toyota was one of the first to apply flexible robotic systems for these tasks. Some of the changes were as simple as standardizing the hole sizes used to hang parts on hooks. The number and types of fasteners were reduced in order to standardize assembly steps and tools. In some cases, identical subassemblies could be used in several models. Toyota engineers then determined that the remaining critical bottleneck in the retooling process was the time required to change the stamping dies used for body parts. These were adjusted by hand, using crowbars and wrenches. It sometimes took as long as several days to install a large (multiton) die set and adjust it for acceptable quality. Further, these were usually installed one at a time by a team of experts, so that the line was down for several weeks. Toyota implemented a strategy called Single Minute Exchange of Die (SMED), developed by Shigeo Shingo. With very simple fixtures, measurements were substituted for adjustments. Almost immediately, die change times fell to about half an hour. At the same time, quality of the stampings became controlled by a written recipe, reducing the skill required for the change. Analysis showed that the remaining time was used to search for hand tools and move dies. Procedural changes (such as moving the new die in place with the line in operation) and dedicated tool-racks reduced the die-change times to as little as 40 seconds. Dies were changed in a ripple through the factory as a new product began flowing. After SMED, economic lot sizes fell to as little as one vehicle in some Toyota plants. Carrying the process into parts-storage made it possible to store as little as one part in each assembly station. When a part disappeared, that was used as a signal to produce or order a replacement. Philosophy Just-in-time (JIT) inventory systems are not just a simple method that a company has to buy in to; it has a whole philosophy that the company must follow. The ideas in this philosophy come from many different disciplines including; statistics, industrial engineering, production management and behavioral science. In the JIT inventory philosophy there are views with respect to how inventory is looked upon, what it says about the management within the company, and the main principle behind JIT. Firstly, inventory is seen as incurring costs instead of adding value, contrary to traditional thinking. Under the philosophy, businesses are encouraged to eliminate inventory that doesn't add value to the product. Secondly, it sees inventory as a sign of sub par management as it is simply there to hide problems within the production system. These problems include backups at work centres, lack of flexibility for employees and equipment, and inadequate capacity among other things. In short, the just-in-time inventory system is all about having "the right material, at the right time, at the right place, and in the exact amount." Effects Some of the results were unexpected. A huge amount of cash appeared, apparently from nowhere, as in-process inventory was built out and sold. This by itself generated tremendous enthusiasm in upper management. Another surprising effect was that the response time of the factory fell to about a day. This improved customer satisfaction by providing vehicles usually within a day or two of the minimum economic shipping delay. Also, many vehicles began to be built to order, completely eliminating the risk they would not be sold. This dramatically improved the company's return on equity by eliminating a major source of risk. Since assemblers no longer had a choice of which part to use, every part had to fit perfectly. The result was a severe quality assurance crisis, and a dramatic improvement in product quality. Eventually, Toyota redesigned every part of its vehicles to eliminate or widen tolerances, while simultaneously implementing careful statistical controls. (See Total Quality Management). Toyota had to test and train suppliers of parts in order to assure quality and delivery. In some cases, the company eliminated multiple suppliers. When a process problem or bad parts surfaced on the production line, the entire production line had to be slowed or even stopped. No inventory meant that a line could not operate from in-process inventory while a production problem was fixed. Many people in Toyota confidently predicted that the initiative would be abandoned for this reason. In the first week, line stops occurred almost hourly. But by the end of the first month, the rate had fallen to a few line stops per day. After six months, line stops had so little economic effect that Toyota installed an overhead pull-line, similar to a bus bell-pull, that permitted any worker on the production line to order a line stop for a process or quality problem. Even with this, line stops fell to a few per week. The result was a factory that became the envy of the industrialized world, and has since been widely emulated. The Just in Time philosophy was also applied to other segments of the supply chain in several types of industries. In the commercial sector, it meant eliminating one or all of the warehouses in the link between a factory and a retail establishment. Benefits As most companies use an inventory system best suited for their company, the Just-In-Time Inventory System (JIT) can have many benefits resulting from it. The main benefits of JIT are listed below. 1. Set up times are significantly reduced in the warehouse. Cutting down the set up time to be more productive will allow the company to improve their bottom line to look more efficient and focus time spend on other areas that may need improvement. 2. The flows of goods from warehouse to shelves are improved. Having employees focused on specific areas of the system will allow them to process goods faster instead of having them vulnerable to fatigue from doing too many jobs at once and simplifies the tasks at hand. 3. Employees who possess multi-skills are utilized more efficiently. Having employees trained to work on different parts of the inventory cycle system will allow companies to use workers in situations where they are needed when there is a shortage of workers and a high demand for a particular product. 4. Better consistency of scheduling and consistency of employee work hours. If there is no demand for a product at the time, workers don't have to be working. This can save the company money by not having to pay workers for a job not completed or could have them focus on other jobs around the warehouse that would not necessarily be done on a normal day. 5. Increased emphasis on supplier relationships. No company wants a break in their inventory system that would create a shortage of supplies while not having inventory sit on shelves. Having a trusting supplier relationship means that you can rely on goods being there when you need them in order to satisfy the company and keep the company name in good standing with the public. 6. Supplies continue around the clock keeping workers productive and businesses focused on turnover. Having management focused on meeting deadlines will make employees work hard to meet the company goals to see benefits in terms of job satisfaction, promotion or even higher pay. Problems Within a JIT System The major problem with Just In Time operation is that it leaves the supplier and downstream consumers open to supply shocks. In part, this was seen as a feature rather than a bug by Ohno, who used the analogy of lowering the level of a river in order to expose the rocks to explain how removing inventory showed where flow of production was interrupted. Once the barriers were exposed, they could be removed; since one of the main barriers was rework, lowering inventory forced each shop to improve its own quality or cause a holdup in the next downstream area. Just In Time is a means to improving performance of the system, not an end. With shipments coming in sometimes several times per day, Toyota is especially susceptible to an interruption in the flow. For that reason, Toyota is careful to use two suppliers for most assemblies. As noted in Liker (2003), there was an exception to this rule that put the entire company at risk by the 1997 Aisin fire. However, since Toyota also makes a point of maintaining high quality relations with its entire supplier network, several suppliers immediately took up production of the Aisin-built parts by using existing capability and documentation. Thus, a strong, long-term relationship with a few suppliers is preferred to short-term, price-based relationships with competing suppliers. Within a raw material stream As noted by Liker (2003) and Womack and Jones (2003), it would ultimately be desirable to introduce flow and JIT all the way back through the supply stream. However, none of them followed this logically all the way back through the processes to the raw materials. With present technology, for example, an ear of corn cannot be grown and delivered to order [1]. The same is true of most raw materials, which must be discovered and/or grown through natural processes that require time and must account for natural variability in weather and discovery. Oil It has been frequently charged that the oil industry has been influenced by JIT (see here (2004), here (1996), and here (1996)). The argument is presented as follows: The number of refineries in the United States has fallen from 279 in 1975 to 205 in 1990 and further to 149 in 2004. As a result, the industry is susceptible to supply shocks, which cause spikes in prices and subsequently reduction in domestic manufacturing output. The effects of hurricanes Katrina and Rita are given as an example: in 2005, Katrina caused the shutdown of 9 refineries in Louisiana and 6 more in Mississippi, and a large number of oil production and transfer facilities, resulting in the loss of 20% of the US domestic refinery output. Rita subsequently shut down refineries in Texas, further reducing output. The GDP figures for the third and fourth quarters showed a slowdown from 3.5% to 1.2% growth. Similar arguments were made in earlier crises. Beside the obvious point that prices went up because of the reduction in supply and not for anything to do with the practice of JIT, JIT students and even oil & gas industry analysts question whether JIT as it has been developed by Ohno, Goldratt, and others is used by the petroleum industry. Companies routinely shut down facilities for reasons other than the application of JIT. One of those reasons may be economic rationalization: when the benefits of operating no longer outweigh the costs, including opportunity costs, the plant may be economically inefficient. JIT has never subscribed to such considerations directly; following Waddel and Bodek (2005), this ROI-based thinking conforms more to Brown-style accounting and Sloan management. Further, and more significantly, JIT calls for a reduction in inventory capacity, not production capacity. From 1975 to 1990 to 2005, the annual average stocks of gasoline have fallen by only 8.5% from 228,331 to 222,903 bbls to 208,986 (Energy Information Administration data). Stocks fluctuate seasonally by as much as 20,000 bbls. During the 2005 hurricane season, stocks never fell below 194,000 thousand bbls, while the low for the period 1990 to 2006 was 187,017 thousand bbls in 1997. This shows that while industry storage capacity has decreased in the last 30 years, it hasn't been drastically reduced as JIT practitioners would prefer. Finally, as shown in a pair of articles in the Oil & Gas Journal, JIT does not seem to have been a goal of the industry. In Waguespack and Cantor (1996), the authors point out that JIT would require a significant change in the supplier/refiner relationship, but the changes in inventories in the oil industry exhibit none of those tendencies. Specifically, the relationships remain cost-driven among many competing suppliers rather than quality-based among a select few long-term relationships. They find that a large part of the shift came about because of the availability of short-haul crudes from Latin America. In the follow-up editorial, the Oil & Gas Journal claimed that "casually adopting popular business terminology that doesn't apply" had provided a "rhetorical bogey" to industry critics. Confessing that they had been as guilty as other media sources, they confirmed that "It also happens not to be accurate." Theory Consider a (highly) simplified mathematical model of the ordering process. Let: K = the incremental cost of placing an order kc = the annual cost of carrying one unit of inventory D = annual demand in units Q = optimal order size in units TC = total cost over the year We want to know Q. We assume that demand is constant and that the company runs down the stock to zero and then places an order, which arrives instantly. Hence the average stock held (the average of zero and Q, assuming constant usage) is Q / 2. Also, the annual number of orders placed is D / Q. TC consists of two components. The first is the cost of carrying inventory, which is given by Q * kc / 2, i.e. the average inventory times the carrying cost per unit. The second cost is the cost of placing orders, given by D * K / Q, the annual number of orders, D / Q. times the cost per order, K. Thus total annual cost is .
Reduced: 93% of original size [ 681 x 293 ] - Click to view full image
which is known as the Economic Order Quantity or EOQ formula. The key Japanese breakthrough was to reduce K to a very low level and to resupply frequently instead of holding excess stocks. In practice JIT works well for many businesses, but it is not appropriate if K is not small. The theory above can be fairly easily adapted to take into account realistic features such as delays in delivery times and fluctuations in demand. Both of these are usually modelled by normal distributions. The delay in delivery, in particular, means that additional 'safety stocks' need to be held if a stockout is to be rendered very unlikely.
Post a Comment
Enter your email address:
No comments:
Post a Comment